Application:
Widely used in low voltage insulated lines,these connectors lead the branch connection from the main conductor,provide T-connections in low voltage insulated wires,and provide cable branch connections for building distribution systems.


Model: KTEP

The section plane of main wire: 4-50 mm2
The section plane of branch: 1.5-10 mm2
Piercing depth: ≥3mm
Rating current(A): 70
Exterior dimension (mm): 27*41*62
Weight: 50g
Torque: 9+/-1Nm

1. Special moment nut let the piercing pressure constant, keep good electric connection and make no damage to cable.
2. Special connecting blade apply to joint of Cu(Al) and Cu(Al) or Cu and Al.
3. Resin effusion technology and self-seam structure let connector has waterproof, high insulation strength feature. It can resistant to 4kv 1min in water.
4. Small electric connecting resistance, resistant to high impulse current. The change of resistance is very small. All the parameters are very good to the requirement that described by WHVRI.
5. Stainless bolt and nut and the other components let the clamp has excellent mechanic and resistance to corrosion performance.
6. Adopted special feature rubber as waterproof and insulation material. It let the clamp can be safely used in -50---150 degree C. The special rubber will not failure in 50 years. The end cover has bolt frame. It can adapt to all kinds of cables. (Attention: Only the new rubber can be colored to colorful rubber. The re-used rubber can not be colored. )
7. The shuck is made by imported excellent glasses enhanced plastic. So, it has excellent mechanic feature and environmental aging performance.
8. All the components were desgined by CAD and manufactured by CAM. They all have same performances.