CL-EIP1200,2400,4400 TDM Over IP converter is Connecting traditional circuit-switched service as well as packet-switched data service over IP networks has become an attractive alternative to sufficiently using IP networks today. Efficiently combining TCP/IP technology together with TDM technology, TDM over IP circuit simulator - TDMoP. It enables synchronous E1 signals delivered over broadband IP networks, takes the advantage of the low cost data transmission networks, seamlessly connects with all the traditional TDM terminals, that is, accommodates the traditional TDM services, such as PBX, modem, fax and video into IP networks.

Feature:
1. Support mixed transmission of up to 1,2,4×E1 circuit traffic and high speed IP data traffic
2. Support framed, non-framed E1 signal transmission
3. High accuracy and stability of clock with closed-loop PLL technology
4. Fast clock-locking, easy synchronization
5. QOS management, ensuring high quality of TDM traffic
6. High reliability, long MTBF
7. G.703 E1 and 10/100Base-T Ethernet Interface
8. Configure by CLI: RS-232/v.24, Telnet
9. Easy to use, plug in and play

Specification:
1. Power
AC Input: 100~240V DC Input: -48V
Power Consumption:≤3W
2. Ethernet Port
Standards IEEE 802.3, 802.1p/Q
Data Rate 10/100 Base-T, half duplex or full duplex, auto-negotiate
Range Up to 100m on UTP Cat-5 cable
Connector RJ-45, 8 pins
3. E1 Port
Standards ITU-T Rec. G.703, G.704, G.706, G.732, G.823
Signaling Framed &Non-framed, CCS, CAS
Nominal Date Rate 2.048 Mbps
Line Code HDB3
Receive Signal Level Without LTU: 0 to -15dB
With LTU: 0 to -43dB
Line Type 75Ω (Unbalanced)
“pulse” scope Nominal 2.37V±10% (75Ω)
“0” scope ±0.1V
Connectors BNC (75Ω)
4. Control Port
Standards RS-232/V.24 (DCE)
Data Rate 9600 Baud
Date Format Data 8; stop 1; checkout/traffic none
Connectors DB-9 (female)
5. Environment
Operation Temperature: 0~50O
Operation Relative Humidity: 20~90%
Store Temperature: -20~65
Store Relative Humidity: 10~95%

More Info:
www.cutelink.com.cn
cutelink.zerci.com