Infiltration"G.E.N.I.C.H." concept developed by motorcycle, participating motogp M1factory cars and YZF-R6 are equipped with the Volvo-T (Yamaha ChipControlled Throttle) electronic throttle, and in 07 YZF-R1 first usedmold - I (Yamaha Chip Controlled Intake) chip control intake system,the use of servo motors to change the length of the trip.Iwill mold-engine business at the low to make a longer trip Inlet toupgrade Inlet inertia, and the engine to high, then reduce the intakeinlet itinerary reduce inertia, resulting in several different underable to create the best gas flow, improve performance and drivingpleasure of high-tech equipment.


07 R1 with a new engine and chassis methotrexate and brown lines. Although the new bore and stroke engine data and R1 06 77 x 53.6mm are the same, but all other details have changed.Apart from titanium wow mediator feet and the new water tanks, the mosttalked about is the R1 sensitivities to abandon the past three to twoengine valve settings, but only to traditional two-two of the fourvalve engine.But the combustion chamber to increase the compression ratio of 12.7:1,equipped with T-S40 and S40 - electronic throttle control chip I IntakeSystem: The non-ram-air all of the 180ps/12, 500rpm astonishinghorsepower and output are more linear, more broad torque distribution ,the new R1 on the road also very good play. 5ps. It increased the horsepower output 10ms.

R1 Delta Box Frame is a new design, by the casting of aluminum alloy and high-tension produced rigid better balance. New aluminum tail quintals of torsion of a 30% increase, but a slight decrease side. R1 design direction is to enhance the attack bending performance.The first shock absorber 14% compression performance gains have reducedfork in the fork tube oil bubble may flow back and forth . Mei shock absorber damping adjustment for the high and low speed into an independent set. 07 R1 used to hide radioactive six abalone, the first disc diameter from 320mm to 310mm.