Stainless Steel Mesh,Stainless Steel Wire Mesh-Type 316L

Stainless Steel Wire Mesh

Stainless Steel Wire Mesh Square Opening

Anping Shengfa Metal Products Co.,Ltd. is the major manufacturer of stainless steel wire mesh of China, especially known for its best quality and excellent reputation. Stainless steel wire mesh square opening is in contrast with stainless steel wire mesh Dutch woven

Stainless Steel Wire Mesh Square Opening:

Stainless Steel Square Wire Mesh produced by ShengFa is classified into two types according to weaving patterns:

Stainless steel square wire mesh plain woven
Stainless steel square wire mesh twill woven

Stainless Steel Wire Mesh Plain weave is the most commonly used weave. Each warp wire crosses alternately above and below each weft wire. Warp and weft wires generally have the same diameter.

Twill Weave Stainless Steel Wire Mesh is made by each weft wire passing alternately over two, and then under two successive warp wires and each warp wire passing alternately over two and under two successive weft wires. It is possible to be used to allow a heavier than standard wire diameter.
Stainless Steel Square Wire Mesh Varieties according to materials:
Stainless steel square wire mesh type 304
Stainless steel square wire mesh type 304L
Stainless steel square wire mesh type 316
Stainless steel square wire mesh type 316L

Type 304 is often referred to as "18-8" ( 18% chromium, 8% nickel ) with the basic stainless alloy mostly commonly, utilized for wire cloth weaving. It withstands outdoor exposure without rusting and resists oxidation at an elevated temperature up to 1400 Degrees Fahrenheit. Type 304 L is very similar to T-304, the difference being the reduced carbon content for better weaving and secondary welding characteristics. Type 316 Stabilized by the addition of 2% molydbenum, T-316 is an "18-8" alloy. It has better resistance to pitting corrosion than the other chromium-nickel stainless steels where brines, sulphur-bearing water or halogen salts, such as chlorides are present. A valuable property of T-316 is high creep strength at elevated temperatures. Other mechanical properties and fabricating characteristics are similar to T-304. Type 316 L is very similar to T-316, the difference being the reduced carbon content for wire cloth weaving and secondary welding characteristics.

Stainless Steel Square Wire Mesh Uses: Stainless steel wire mesh and stainless steel wire cloth products are widely used in petroleum, chemical industry, environment protection, mine, airspace, paper-making,electronic, metallurgy etc. Special size and specification are available according to customers requirement.

Stainless Steel Square Wire Mesh Sizes:

Standard roll width of stainless steel square wire mesh: 1m or 48"
Standard roll length of stainless steel square wire mesh: 30m or 100'



Specification of Stainless Steel Wire Mesh
Mesh/Inch Wire Gauge(SWG) Aperture in mm
3mesh x 3mesh 14 6.27
4mesh x 4mesh 16 4.27
5mesh x 5mesh 18 3.86
6mesh x 6mesh 18 3.04
8mesh x 8mesh 20 2.26
10mesh x 10mesh 20 1.63
20mesh x 20mesh 30 0.95
30mesh x 30mesh 34 0.61
40mesh x 40mesh 36 0.44
50mesh x 50mesh 38 0.36
60mesh x 60mesh 40 0.30
80mesh x 80mesh 42 0.21
100mesh x 100mesh 44 0.172
120mesh x 120mesh 44 0.13
150mesh x 150mesh 46 0.108
160mesh x 160mesh 46 0.097
180mesh x 180mesh 47 0.09
200mesh x 200mesh 47 0.077
250mesh x 250mesh 48 0.061
280mesh x 280mesh 49 0.060
300mesh x 300mesh 49 0.054
350mesh x 350mesh 49 0.042
400mesh x 400mesh 50 0.0385

Roll width: 2'-8'